Processes

Although these were mentioned in the last chapter, we are going to give a quick reminder about file descriptors. A zine from Julia Evans gives some more details (Evans #ref-evans_2018).

The kernel keeps track of the file descriptors and what they point to. Later we will learn two things: that file descriptors point to more than files and that the operating system keeps track of them.

Notice that file descriptors may be reused between processes, but inside of a process, they are unique. File descriptors may have a notion of position. These are known as seekable streams. A program can read a file on disk completely because the OS keeps track of the position in the file, an attribute that belongs to your process as well.

Other file descriptors point to network sockets and various other pieces of information, that are unseekable streams.

A process is an instance of a computer program that may be running. Processes have many resources at their disposal. At the start of each program, a program gets one process, but each program can make more processes. A program consists of the following:

• A binary format: This tells the operating system about the various sections of bits in the binary – which parts are executable, which parts are constants, which libraries to include etc.

• A set of machine instructions

• A number denoting which instruction to start from

• Constants

• Libraries to link and where to fill in the address of those libraries

Processes are powerful, but they are isolated!

That means that by default, no process can communicate with another process.

This is important because in complex systems (like the University of Illinois Engineering Workstations), it is likely that different processes will have different privileges. One certainly doesn’t want the average user to be able to bring down the entire system, by either purposely or accidentally modifying a process. As most of you have realized by now, if you stuck the following code snippet into a program, the variables are unshared between two parallel invocations of the program.

int secrets;
secrets++;
printf("%d\n", secrets);

On two different terminals, they would both print out 1 not 2. Even if we changed the code to attempt to affect other process instances, there would be no way to change another process’ state unintentionally. However, there are other intentional ways to change the program states of other processes.

Memory Layout

When a process starts, it gets its own address space. Each process gets the following.

• A Stack. The stack is the place where automatically allocated variables and function call return addresses are stored. Every time a new variable is declared, the program moves the stack pointer down to reserve space for the variable. This segment of the stack is writable but not executable. This behavior is controlled by the no-execute (NX) bit, sometimes called the WX̂ (write XOR execute) bit, which helps prevent malicious code, such as shellcode from being run on the stack.

  If the stack grows too far – meaning that it either grows beyond a preset boundary or intersects the heap – the program will stack overflow error, most likely resulting in a SEGFAULT. The stack is statically allocated by default; there is only a certain amount of space to which one can write.

• A Heap. The heap is a contiguous, expanding region of memory (“Overview of Malloc” #ref-mallocinternals). If a program wants to allocate an object whose lifetime is manually controlled or whose size cannot be determined at compile-time, it would want to create a heap variable.

  The heap starts at the top of the text segment and grows upward, meaning malloc may push the heap boundary – called the program break – upward.

  We will explore this in more depth in our chapter on memory allocation. This area is also writable but not executable. One can run out of heap memory if the system is constrained or if a program run out of addresses, a phenomenon that is more common on a 32-bit system.

• A Data Segment

  This segment contains two parts, an initialized data segment, and an uninitialized segment. Furthermore, the initialized data segment is divided into a readable and writable section.

  • Initialized Data Segment This contains all of a program’s globals and any other static variables.

    This section starts at the end of the text segment and starts at a constant size because the number of globals is known at compile time. The end of the data segment is called the program break and can be extended via the use of brk / sbrk.

    This section is writable (Van der Linden #ref-van1994expert P. 124). Most notably, this section contains variables that were initialized with a static initializer, as follows:

    int global = 1;
    

  • Uninitialized Data Segment / BSS BSS stands for an old assembler operator known as Block Started by Symbol.

    This contains all of your globals and any other static duration variables that are implicitly zeroed out.

    Example:

    int assumed_to_be_zero;
    

    This variable will be zeroed; otherwise, we would have a security risk involving isolation from other processes.

    They get put in a different section to speed up process start up time.

    This section starts at the end of the data segment and is also static in size because the amount of globals is known at compile time.

    Currently, both the initialized and BSS data segments are combined and referred to as the data segment (Van der Linden #ref-van1994expert P. 124), despite being somewhat different in purpose.

  • A Text Segment. This is where all executable instructions are stored, and is readable (function pointers) but not writable.

    The program counter moves through this segment executing instructions one after the other.

    It is important to note that this is the only executable section of the program, by default.

    If a program’s code while it’s running, the program most likely will SEGFAULT.

    There are ways around it, but we will not be exploring these in this course.

    Why doesn’t it always start at zero? This is because of a security feature called https://en.wikipedia.org/wiki/Address_space_layout_randomization.

    The reasons for and explanation about this is outside the scope of this class, but it is good to know about its existence.

    Having said that, this address can be made constant, if a program is compiled with the DEBUG flag.

Other Contents

To keep track of all these processes, your operating system gives each process a number called the process ID (PID). Processes are also given the PID of their parent process, called parent process ID (PPID). Every process has a parent, that parent could be init.d.

Processes could also contain the following information:

• Running State - Whether a process is getting ready, running, stopped, terminated, etc. (more on this is covered in the chapter on Scheduling).

• File Descriptors - A list of mappings from integers to real devices (files, USB flash drives, sockets)

• Permissions - What user the file is running on and what group the process belongs to. The process can then only perform operations based on the permissions given to the user or group, such as accessing files. There are tricks to make a program take a different user than who started the program i.e. sudo takes a program that a user starts and executes it as root. More specifically, a process has a real user ID (identifies the owner of the process), an effective user ID (used for non-privileged users trying to access files only accessible by superusers), and a saved user ID (used when privileged users perform non-privileged actions).

• Arguments - a list of strings that tell your program what parameters to run under.

• Environment Variables - a list of key-value pair strings in the form NAME=VALUE that one can modify. These are often used to specify paths to libraries and binaries, program configuration settings, etc.

According to the POSIX specification, a process only needs a thread and address space, but most kernel developers and users know that only these aren’t enough (“Definitions” #ref-process_def).

A word of warning

Process forking is a powerful and dangerous tool. If you make a mistake resulting in a fork bomb, you can bring down an entire system. To reduce the chances of this, limit your maximum number of processes to a small number e.g. 40 by typing ulimit -u 40 into a command line. Note, this limit is only for the user, which means if you fork bomb, then you won’t be able to kill all created process since calling killall requires your shell to fork(). Quite unfortunate. One solution is to spawn another shell instance as another user (for example root) beforehand and kill processes from there.

Another is to use the built-in exec command to kill all the user processes (you only have one attempt at this).

Finally, you could reboot the system, but you only have one shot at this with the exec function.

When testing fork() code, ensure that you have either root and/or physical access to the machine involved. If you must work on fork() code remotely, remember that kill -9 -1 will save you in the event of an emergency. Fork can be extremely dangerous if you aren’t prepared for it. You have been warned.

Fork Functionality

The fork system call clones the current process to create a new process, called a child process. This occurs by duplicating the state of the existing process with a few minor differences.

• The child process executes the next line after the fork() as the parent process does.

• Just as a side remark, in older UNIX systems, the entire address space of the parent process was directly copied regardless of whether the resource was modified or not. The current behavior is for the kernel to perform a https://en.wikipedia.org/wiki/Copy-on-write, which saves a lot of resources, while being time efficient (Bovet and Cesati #ref-Bovet:2005:ULK:1077084 Copy-on-write section).

Here is a simple example:

printf("I'm printed once!\n");
fork();
// Now two processes running if fork succeeded
// and each process will print out the next line.
printf("This line twice!\n");

Here is a simple example of this address space cloning. The following program may print out 42 twice - but the fork() is after the printf!? Why?

#include <unistd.h> /*fork declared here*/
#include <stdio.h> /* printf declared here*/
int main() {
  int answer = 84 >> 1;
  printf("Answer: %d", answer);
  fork();
  return 0;
}

The printf line is executed only once however notice that the printed contents are not flushed to standard out. There’s no newline printed, we didn’t call fflush, or change the buffering mode. The output text is therefore still in process memory waiting to be sent. When fork() is executed the entire process memory is duplicated including the buffer. Thus, the child process starts with a non-empty output buffer which may be flushed when the program exits. We say may because the contents may be unwritten given a bad program exit as well.

To write code that is different for the parent and child process, check the return value of fork(). If fork() returns -1, that implies something went wrong in the process of creating a new child. One should check the value stored in errno to determine what kind of error occurred. Common errors include EAGAIN and ENOENT Which are essentially “try again – resource temporarily unavailable”, and “no such file or directory”.

Similarly, a return value of 0 indicates that we are operating in the context of the child process, whereas a positive integer shows that we are in the context of the parent process.

The positive value returned by fork() is the process id (pid) of the child.

A way to remember what is represented by the return value of fork is, that the child process can find its parent - the original process that was duplicated - by calling getppid() - so does not need any additional return information from fork(). However, the parent process may have many child processes, and therefore needs to be explicitly informed of its child PIDs.

According to the POSIX standard, every process only has a single parent process.

The parent process can only know the PID of the new child process from the return value of fork:

pid_t id = fork();
if (id == -1) exit(1); // fork failed
if (id > 0) {
  // Original parent
  // A child process with id 'id'
  // Use waitpid to wait for the child to finish
} else { // returned zero
  // Child Process
}

A slightly silly example is shown below. What will it print? Try running this program with multiple arguments.

#include <unistd.h>
#include <stdio.h>
int main(int argc, char **argv) {
  pid_t id;
  int status;
  while (--argc && (id=fork())) {
    waitpid(id,&status,0); /* Wait for child*/
  }
  printf("%d:%s\n", argc, argv[argc]);
  return 0;
}

Another example is below. This is the amazing parallel apparent-O(N) sleepsort is today’s silly winner. First published on https://dis.4chan.org/read/prog/1295544154. A version of this awful but amusing sorting algorithm is shown below. This sorting algorithm may fail to produce the correct output.

int main(int c, char **v) {
  while (--c > 1 && !fork());
  int val  = atoi(v[c]);
  sleep(val);
  printf("%d\n", val);
  return 0;
}

Imagine that we ran this program like so

$ ./ssort 1 3 2 4

The algorithm isn’t actually O(N) because of how the system scheduler works. In essence, this program outsources the actual sorting to the operating system.

Fork Bomb

A ‘fork bomb’ is what we warned you about earlier. This occurs when there is an attempt to create an infinite number of processes. This will often bring a system to a near-standstill, as it attempts to allocate CPU time and memory to a large number of processes that are ready to run. System administrators don’t like them and may set upper limits on the number of processes each user can have, or revoke login rights because they create disturbances in the Force for other users’ programs. A program can limit the number of child processes created by using setrlimit().

Fork bombs are not necessarily malicious - they occasionally occur due to programming errors. Below is a simple example that is malicious.

while (1) fork();

It is easy to cause one, if you are careless while calling fork, especially in a loop. Can you spot the fork bomb here?

#include <unistd.h>
#define HELLO_NUMBER 10

int main(){
  pid_t children[HELLO_NUMBER];
  int i;
  for(i = 0; i < HELLO_NUMBER; i++){
    pid_t child = fork();
    if(child == -1) {
      break;
    }
    if(child == 0) {
      // Child
      execlp("ehco", "echo", "hello", NULL);
    }
    else{
      // Parent
      children[i] = child;
    }
  }

  int j;
  for(j = 0; j < i; j++){
    waitpid(children[j], NULL, 0);
  }
  return 0;
}

We misspelled ehco, so the exec call fails. What does this mean? Instead of creating 10 processes, we created 1024 processes, fork bombing our machine. How could we prevent this? Add an exit right after exec, so that if exec fails, we won’t end up calling fork an unbounded number of times. There are various other ways. What if we removed the echo binary? What if the binary itself creates a fork bomb?

Signals

We won’t fully explore signals until the end of the course, but it is relevant to broach the subject now because various semantics related to fork and other function calls detail what a signal is.

A signal can be thought of as a software interrupt. This means that a process that receives a signal stops the execution of the current program and makes the program respond to the signal.

There are various signals defined by the operating system, two of which you may already know: SIGSEGV and SIGINT. The first is caused by an illegal memory access, and the second is sent by a user wanting to terminate a program. In each case, the program jumps from the current line being executed to the signal handler. If no signal handler is supplied by the program, a default handler is executed – such as terminating the program, or ignoring the signal.

Here is an example of a simple user-defined signal handler:

void handler(int signum) {
  write(1, "signaled!", 9);
  // we don't need the signum because we are only catching SIGINT
  // if you want to use the same piece of code for multiple
  // signals, check the signum
}
int main() {
  signal(SIGINT, handler);
  while(1) ;
  return 0;
}

A signal has four stages in its life cycle: generated, pending, blocked, and received state. These refer to when a process generates a signal, the kernel is about to deliver a signal, the signal is blocked, and when the kernel delivers a signal, each of which requires some time to complete. Read more in the introduction to the Signals chapter.

The terminology is important because fork and exec require different operations based on the state a signal is in.

To note, it is generally poor programming practice to use signals in program logic, which is to send a signal to perform a certain operation. The reason: signals have no time frame of delivery and no assurance that they will be delivered. There are better ways to communicate between two processes.

If you want to read more, feel free to skip ahead to the chapter on POSIX signals and read it over. It isn’t long and gives you the long and short about how to deal with signals in processes.

POSIX Fork Details

POSIX determines the standards of fork (“Fork” #ref-fork_2018). You can read the previous citation, but do note that it can be quite verbose. Here is a summary of what is relevant:

1. Fork will return a non-negative integer on success.

2. A child will inherit any open file descriptors of the parent. That means if a parent half of the file and forks, the child will start at that offset. A read on the child’s end will shift the parent’s offset by the same amount. Any other flags are also carried over.

3. Pending signals are not inherited. This means that if a parent has a pending signal and creates a child, the child will not receive that signal unless another process signals the child.

4. The process will be created with one thread (more on that later. The general consensus is to not create processes and threads at the same time).

5. Since we have copy on write (COW), read-only memory addresses are shared between processes.

6. If a program sets up certain regions of memory, they can be shared between processes.

7. Signal handlers are inherited but can be changed.

8. The process’ current working directory (often abbreviated to CWD) is inherited but can be changed.

9. Environment variables are inherited but can be changed.

Key differences between the parent and the child include:

• The process id returned by getpid(). The parent process id returned by getppid().

• The parent is notified via a signal, SIGCHLD, when the child process finishes but not vice versa.

• The child does not inherit pending signals or timer alarms. For a complete list see the http://man7.org/linux/man-pages/man2/fork.2.html

• The child has its own set of environment variables.

Fork and FILEs

There are some tricky edge cases when it comes to using FILE and forking. First, we have to make a technical distinction. A File Description is the struct that a file descriptor points to. File descriptors can point to many different structs, but for our purposes, they’ll point to a struct that represents a file on a filesystem. This file description contains elements like paths, how far the descriptor has read into the file, etc. A file descriptor points to a file description. This is important because when a process is forked, only the file descriptor is cloned, not the description. The following snippet contains only one description.

  int file = open(...);
  if(!fork) {
    read(file, ...);
  } else {
    read(file, ...);
  }

One process will read one part of the file, the other process will read another part of the file. In the following example, there are two descriptions caused by two different file handles.

  if(!fork) {
    int file = open(...);
    read(file, ...);
  } else {
    int file = open(...);
    read(file, ...);
  }

Let’s consider our motivating example.

$ cat test.txt
A
B
C

Take a look at this code, what does it do?

size_t buffer_cap = 0;
char * buffer = NULL;
ssize_t nread;
FILE * file = fopen("test.txt", "r");
int count = 0;
while((nread = getline(&buffer, &buffer_cap, file) != -1) {
  printf("%s", buffer);
  if(fork() == 0) { 
    exit(0);
  }
  wait(NULL);
}

The initial thought may be that it prints the file line by line with some extra forking. It is actually undefined behavior because we didn’t prepare the file descriptors. To make a long story short, here is what to do to avoid the example.

1. You as the programmer need to make sure that all of your file descriptors are prepared before forking.

2. If it is a file descriptor or an unbuffered FILE*, it is already prepared.

3. If the FILE* is open for reading and has been read fully, it is already prepared.

4. Otherwise, the FILE* must be fflush’ed or closed to be prepared.

5. If the file descriptor is prepared, it must unactive in the parent process if the child process is using it or vice versa. A process is using it if it is read or written or if that process for whatever reason calls exit. If a process uses it when the other process is as well, the whole application’s behavior is undefined.

So how would we fix the code? We would have to flush the file before forking and refrain from using it until after the wait call – more on the specifics of this next section.

size_t buffer_cap = 0;
char * buffer = NULL;
ssize_t nread;
FILE * file = fopen("test.txt", "r");
int count = 0;
while((nread = getline(&buffer, &buffer_cap, file) != -1) {
  printf("%s", buffer);
  fflush(file);
  if(fork() == 0) { 
    exit(0);
  }
  wait(NULL);
}

What if the parent process and the child process need to perform asynchronously and need to keep the file handle open? Due to event ordering, we need to make sure that parent process knows that the child is finished using wait. We’ll talk about Inter-Process communication in a later chapter, but now we can use the double fork method.

//... 
fflush(file);
pid_t child = fork();
if(child == 0) { 
  fclose(file);
  if (fork() == 0) {
    // Do asynchronous work
    // Safe exit, this child doesn't know about
    // the file descriptor
    exit(0);
  }
  exit(0);
}
waitpid(child, NULL, 0);

If the parent process wants to wait for the child to finish, it must use waitpid (or wait), both of which wait for a child to change process states, which can be one of the following:

1. The child terminated

2. The child was stopped by a signal

3. The child was resumed by a signal

Note that waitpid can be set to be non-blocking, which means they will return immediately, letting a program know if the child has exited.

pid_t child_id = fork();
if (child_id == -1) { perror("fork"); exit(EXIT_FAILURE);}
if (child_id > 0) {
  // We have a child! Get their exit code
  int status;
  waitpid( child_id, &status, 0 );
  // code not shown to get exit status from child
} else { // In child ...
  // start calculation
  exit(123);
}

wait is a simpler version of waitpid. wait accepts a pointer to an integer and waits on any child process. After the first one changes state, wait returns. Here is the behavior of waitpid:

A program can wait on a specific process, or it can pass in special values for the pid to do different things (check the man pages).

The last parameter to waitpid is an option parameter. The options are listed below:

WNOHANG - Return whetherthe searched process has exited

WNOWAIT - Wait, but leave the child wait-able by another wait call

WEXITED - Wait for exited children

WSTOPPED - Wait for stopped children

WCONTINUED - Wait for continued children

Exit statuses or the value stored in the integer pointer for both of the calls above are explained below.

Exit statuses

To find the return value of main() or value included in exit()), Use the Wait macros - typically a program will use WIFEXITED and WEXITSTATUS . See wait/waitpid man page for more information.

int status;
pid_t child = fork();
if (child == -1) {
  return 1; //Failed
}
if (child > 0) {
  // Parent, wait for child to finish
  pid_t pid = waitpid(child, &status, 0);
  if (pid != -1 && WIFEXITED(status)) {
    int exit_status = WEXITSTATUS(status);
    printf("Process %d returned %d" , pid, exit_status);
  }
} else {
  // Child, do something interesting
  execl("/bin/ls", "/bin/ls", ".", (char *) NULL); // "ls ."
}

A process can only have 256 return values, the rest of the bits are informational, and the information is extracted with bit shifting. However, the kernel has an internal way of keeping track of signaled, exited, or stopped processes. This API is abstracted so that that the kernel developers are free to change it at will. Remember: these macros only make sense if the precondition is met. For example, a process’ exit status won’t be defined if the process isn’t signaled. The macros will not do the checking for the program, so it’s up to the programmer to make sure the logic is correct. As an example above, the program should use the WIFSTOPPED to check if a process was stopped and then the WSTOPSIG to find the signal that stopped it. As such, there is no need to memorize the following. This is a high-level overview of how information is stored inside the status variables. From the sys/wait.h of an old Berkeley Standard Distribution(BSD) kernel (“Source to Sys/Wait.h,” #ref-sys/wait.h):

/* If WIFEXITED(STATUS), the low-order 8 bits of the status. */
#define _WSTATUS(x) (_W_INT(x) & 0177)
#define _WSTOPPED 0177    /* _WSTATUS if process is stopped */
#define WIFSTOPPED(x) (_WSTATUS(x) == _WSTOPPED)
#define WSTOPSIG(x) (_W_INT(x) >> 8)
#define WIFSIGNALED(x)  (_WSTATUS(x) != _WSTOPPED && _WSTATUS(x) != 0)
#define WTERMSIG(x) (_WSTATUS(x))
#define WIFEXITED(x)  (_WSTATUS(x) == 0)

There is a convention about exit codes. If the process exited normally and everything was successful, then a zero should be returned. Beyond that, there aren’t too many widely accepted conventions. If a program specifies return codes to mean certain conditions, it may be able to make more sense of the 256 error codes. For example, a program could return 1 if the program went to stage 1 (like writing to a file) 2 if it did something else, etc. Usually, UNIX programs are not designed to follow this policy, for the sake of simplicity.

Zombies and Orphans

It is good practice to wait on your process’ children. If a parent doesn’t wait on your children they become, what are called zombies. Zombies are created when a child terminates and then takes up a spot in the kernel process table for your process. The process table keeps track of the following information about a process: PID, status, and how it was killed. The only way to get rid of a zombie is to wait on your children. If a long-running parent never waits for your children, it may lose the ability to fork.

Having said that, a program doesn’t always need to wait for your children! Your parent process can continue to execute code without having to wait for the child process. If a parent dies without waiting on its children, a process can orphan its children. Once a parent process completes, any of its children will be assigned to init - the first process, whose PID is 1. Therefore, these children would see getppid() return a value of 1. These orphans will eventually finish and for a brief moment become a zombie. The init process automatically waits for all of its children, thus removing these zombies from the system.

Extra: Asynchronously Waiting

Warning: This section uses signals which are partially introduced. The parent gets the signal SIGCHLD when a child completes, so the signal handler can wait for the process. A slightly simplified version is shown below.

pid_t child;

void cleanup(int signal) {
  int status;
  waitpid(child, &status, 0);
  write(1,"cleanup!\n",9);
}
int main() {
  // Register signal handler BEFORE the child can finish
  signal(SIGCHLD, cleanup); // or better - sigaction
  child = fork();
  if (child == -1) { exit(EXIT_FAILURE);}

  if (child == 0) {
    // Do background stuff e.g. call exec
  } else { /* I'm the parent! */
    sleep(4); // so we can see the cleanup
    puts("Parent is done");
  }
  return 0;
}

However, the above example misses a couple of subtle points.

1. More than one child may have finished but the parent will only get one SIGCHLD signal (signals are not queued)

2. SIGCHLD signals can be sent for other reasons (e.g. a child process has temporarily stopped)

3. It uses the deprecated signal code, instead of the more portable sigaction.

A more robust code to reap zombies is shown below.

void cleanup(int signal) {
  int status;
  while (waitpid((pid_t) (-1), 0, WNOHANG) > 0) {

  }
}

To make the child process execute another program, use one of the http://man7.org/linux/man-pages/man3/exec.3.html functions after forking. The exec set of functions replaces the process image with that of the specified program. This means that any lines of code after the exec call are replaced with those of the executed program. Any other work a program wants the child process to do should be done before the exec call. The naming schemes can be shortened mnemonically.

1. e – An array of pointers to environment variables is explicitly passed to the new process image.

2. l – Command-line arguments are passed individually (a list) to the function.

3. p – Uses the PATH environment variable to find the file named in the file argument to be executed.

4. v – Command-line arguments are passed to the function as an array (vector) of pointers.

Note that if the information is passed via an array, the last element must be followed by a NULL element to terminate the array.

An example of this code is below. This code executes ls

#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <stdlib.h>
#include <stdio.h>

int main(int argc, char**argv) {
  pid_t child = fork();
  if (child == -1) return EXIT_FAILURE;
  if (child) {
    int status;
    waitpid(child , &status ,0);
    return EXIT_SUCCESS;

  } else {
    // Other versions of exec pass in arguments as arrays
    // Remember first arg is the program name
    // Last arg must be a char pointer to NULL

    execl("/bin/ls", "/bin/ls", "-alh", (char *) NULL);

    // If we get to this line, something went wrong!
    perror("exec failed!");
  }
}

Try to decode the following example

#include <unistd.h>
#include <fcntl.h> // O_CREAT, O_APPEND etc. defined here

int main() {
  close(1); // close standard out
  open("log.txt", O_RDWR | O_CREAT | O_APPEND, S_IRUSR | S_IWUSR);
  puts("Captain's log");
  chdir("/usr/include");
  // execl( executable,  arguments for executable including program name and NULL at the end)

  execl("/bin/ls", /* Remaining items sent to ls*/ "/bin/ls", ".", (char *) NULL); // "ls ."
  perror("exec failed");
  return 0;
}

The example writes “Captain’s Log” to a file then prints everything in /usr/include to the same file. There’s no error checking in the above code (we assume close, open, chdir etc. work as expected).

1. open – will use the lowest available file descriptor (i.e. 1) ; so standard out(stdout) is now redirected to the log file.

2. chdir – Change the current directory to /usr/include

3. execl – Replace the program image with /bin/ls and call its main() method

4. perror – We don’t expect to get here - if we did then exec failed.

5. We need the “return 0;” because compilers complain if we don’t have it.

POSIX Exec Details

POSIX details all of the semantics that exec needs to cover (“Exec” #ref-exec_2018). Note the following

1. File descriptors are preserved after an exec. That means if a program open a file and doesn’t to close it, it remains open in the child. This is a problem because usually the child doesn’t know about those file descriptors. Nevertheless, they take up a slot in the file descriptor table and could possibly prevent other processes from accessing the file. The one exception to this is if the file descriptor has the Close-On-Exec flag set (O_CLOEXEC) – we will go over setting flags later.

2. Various signal semantics. The executed processes preserve the signal mask and the pending signal set but does not preserve the signal handlers since it is a different program.

3. Environment variables are preserved unless using an environ version of exec

4. The operating system may open up 0, 1, 2 – stdin, stdout, stderr, if they are closed after exec, most of the time they leave them closed.

5. The executed process runs as the same PID and has the same parent and process group as the previous process.

6. The executed process is run on the same user and group with the same working directory

Shortcuts

system pre-packs the above code (Jones #ref-jones2010wg14 P. 371). The following is a snippet of how to use system.

#include <unistd.h>
#include <stdlib.h>

int main(int argc, char**argv) {
  system("ls"); // execl("/bin/sh", "/bin/sh", "-c", "\\"ls\\"")
  return 0;
}

The system call will fork, execute the command passed by parameter and the original parent process will wait for this to finish. This also means that system is a blocking call. The parent process can’t continue until the process started by system exits. Also, system actually creates a shell that is then given the string, which is more overhead than using exec directly. The standard shell will use the PATH environment variable to search for a filename that matches the command. Using system will usually be sufficient for many simple run-this-command problems but can quickly become limiting for more complex or subtle problems, and it hides the mechanics of the fork-exec-wait pattern, so we encourage you to learn and use fork exec and waitpid instead. It also tends to be a huge security risk. By allowing someone to access a shell version of the environment, the program can run into all sorts of problems:

int main(int argc, char**argv) {
  char *to_exec = asprintf("ls %s", argv[1]);
  system(to_exec);
}

Passing something along the lines of argv[1] = “; sudo su” is a huge security risk called https://en.wikipedia.org/wiki/Privilege_escalation.

A common programming pattern is to call fork followed by exec and wait. The original process calls fork, which creates a child process. The child process then uses exec to start the execution of a new program. Meanwhile, the parent uses wait (or waitpid) to wait for the child process to finish.

[language=C]
#include <unistd.h>

int main() {
  pid_t pid = fork();
  if (pid < 0) { // fork failure
    exit(1);
  } else if (pid > 0) {
    int status;
    waitpid(pid, &status, 0);
  } else {
    execl("/bin/ls", "/bin/ls", NULL);
    exit(1); // For safety.
  }
}

Why not execute ls directly? The reason is that now we have a monitor program – our parent that can do other things. It can proceed and execute another function, or it can also modify the state of the system or read the output of the function call.

Environment Variables

Environment variables are variables that the system keeps for all processes to use. Your system has these set up right now! In Bash, some are already defined

$ echo $HOME
/home/bhuvy
$ echo $PATH
/usr/local/sbin:/usr/bin:...

How would a program later these in C? They can call getenv and setenv function respectively.

char* home = getenv("HOME"); // Will return /home/bhuvy
setenv("HOME", "/home/bhuvan", 1 /*set overwrite to true*/ );

Environment variables are important because they are inherited between processes and can be used to specify a standard set of behaviors (“Environment Variables” #ref-env_std_2018), although you don’t need to memorize the options. Another security related concern is that environment variables cannot be read by an outside process, whereas argv can be.

Read the man pages and the POSIX groups above! Here are some guiding questions. Note that we aren’t expecting you to memorize the man page.

• What is one reason fork may fail?

• Does fork copy all pages to the child?

• Are file descriptors cloned between parent and child?

• Are file descriptions cloned between parent and child?

• What is the difference between exec calls ending in an e?

• What is the difference between l and v in an exec call? How about p?

• When does exec error? What happens?

• Does wait only notify if a child has exited?

• Is it an error to pass a negative value into wait?

• How does one extract information out of the status?

• Why may wait fail?

• What happens when a parent doesn’t wait on their children?

• http://man7.org/linux/man-pages/man2/fork.2.html

• http://man7.org/linux/man-pages/man3/exec.3.html

• http://man7.org/linux/man-pages/man2/wait.2.html

Topics

• Correct use of fork, exec and waitpid

• Using exec with a path

• Understanding what fork and exec and waitpid do. E.g. how to use their return values.

• SIGKILL vs SIGSTOP vs SIGINT.

• What signal is sent when press CTRL-C at a terminal?

• Using kill from the shell or the kill POSIX call.

• Process memory isolation.

• Process memory layout (where is the heap, stack etc; invalid memory addresses).

• What is a fork bomb, zombie and orphan? How to create/remove them.

• getpid vs getppid

• How to use the WAIT exit status macros WIFEXITED etc.

• What is the difference between execs with a p and without a p? What does the operating system

• How does a program pass in command line arguments to execl*? How about execv*? What should be the first command line argument by convention?

• How does a program know if exec or fork failed?

• What is the int status pointer passed into wait? When does wait fail?

• What are some differences between SIGKILL, SIGSTOP, SIGCONT, SIGINT? What are the default behaviors? Which ones can a program set up a signal handler for?

• What signal is sent when you press CTRL-C?

• My terminal is anchored to PID = 1337 and has become unresponsive. Write me the terminal command and the C code to send SIGQUIT to it.

• Can one process alter another processes memory through normal means? Why?

• Where is the heap, stack, data, and text segment? Which segments can a program write to? What are invalid memory addresses?

• Code up a fork bomb in C (please don’t run it).

• What is an orphan? How does it become a zombie? What should a parent do to avoid this?

• Don’t you hate it when your parents tell you that you can’t do something? Write a program that sends SIGSTOP to a parent process.

• Write a function that fork exec waits an executable, and using the wait macros tells me if the process exited normally or if it was signaled. If the process exited normally, then print that with the return value. If not, then print the signal number that caused the process to terminate.